Load conditions and Export parameters

Go back to your model in AquaEdit. You should investigate the response and forces in mooring components for the same two load conditions as in CaseStudy03.

Enter the Environmental window be selecting Export . Select the tab Directional . Input the same load conditions by follow the steps as described in step number 31 from chapter 4.7. Apply time series parameters and Export options as described in the figure below. The Water volume correction should be Normal.

Select Export. Navigate to an appropriate place to save the analysis, we have chosen Documents\AquaSim\Analyses\CaseStudy04 and created the folder Dynamic. The analysis is called dynamic.

Select Export.

In the Analyse window, select Start all.

The dynamic analysis has started. Depending on your computer, this analysis should be finished within approximate 1-2 minutes. Follow the status and development of the analysis by selecting

Create max out file

Upon completion of the analysis, select Create max out from the Analyse window.

The analysis is now finished.